How many types of beam are there in civil engineering ?

 There are six types of beam. They are 

  1. Cantilever beam
  2. Simply supported beam
  3. Overhanging beam
  4. Fixed beam
  5. Continuous beam
  6. Cantilever, simply supported beam
Cantilever Beam -
  A beam which is fixed at one end and free at other end, is known as cantilever beam.

Simply supported beam -
  A beam supported or resting on the supports at its end, is called simply supported beam.


Overhanging beam -
  The beam, in which the end portion is extended beyond the support, is called overhanging beam.

Fixed beam - 
A beam whose both ends are fixed or built in walls, is called fixed beam.

Continuous beam - A beam which is provided more than two supports, is called beam.

Cantilever, simply supported -
  The beam which is fixed at one end or built in walls and simply resting at the other end, is called cantilever simply supported beam.

 Thank you.


Comments

Post a Comment

Popular posts from this blog

What is PVC ? What are the advantages of it as a construction material ?

Image
  PVC - Polyvinyl chloride It is a vinyl polymer which structure is very much similar to polythene. It is produced by the free radial polymerization of vinyl chloride. In the recent years, the use of polyvinyl chloride has been increase in construction work due to their excellent property. It is resistance to fire, water, flame, and corrosion. It has light weight and great insulating property. As a building material, PVC is cheap and easy to assemble. It has become an alternative of conventional building materials like wood, concrete or clay. Advantages of PVC - Being a resistance to water, it is used to make shower curtains, water pipes etc. Being a hard plastics, it is used in window profiles, pipe, plumbing etc. It is extensively used in sewer industries for pipelines of the water. It is flexible. After addition of plasticizers, we can use it as roofing membranes and in electric cable insulation.  Thank you. Gracious! My Quora space My YouTube channel
Read more

Lug angle and tension splice - Introduction

Image
  Lug angle - Lug angle is an angle section of short length which connects the outstanding legs of angle section or member to the gusset plate.  It reduces the length of connection to the gusset plate and also reduces the shear lag effect.   When the lug angle is used, the unconnected length of main angle acts like a connected leg and hence entire cross-section area start resisting the tension. Thus, shear lag effect reduces and efficiency of the tension member increases.   Lug angle provides extra gauge line to accommodate the numbers of bolts.   Tension splice - Tension splice are the cover plates used on both sides of butt jointed members. A tension member is spliced when the length of section available is less than that of tension member required. when the members of different thickness are spliced, packing is required to fill the gap. The area of splices should be slightly more than that the member joined. It is also used when the size of the memb...
Read more

Difference between butt joint and lap joint

Image
  LAP JOINT - In this joint, two members are overlapped and connected together. The load in lap joint has eccentricity because centre of gravity of load in both members are not in same line. Thus, a couple is formed which causes undesirable bending in the connection and the rivets may fail in tension. Also due to the eccentricity, the stresses are distributed unevenly across the contact area between the rivets and members to be connected.   BUTT JOINT - In butt joint, both members are placed end to end and additional plate/plates (cover plate) is provided on either one side or both sides and connected to the main plates. When one cover is provided, it is called single cover riveted butt joint and when double cover is provided,it is called double cover riveted butt joint.   It was the difference between lap and butt joint. Now, we will know superiority of butt joint. Butt joint is superior than lap joint because 1. In the case of a double cover butt joint, eccentricity of ...
Read more